Boss RC-2 User Manual

13
Creating Loop Phrases by Recording Guitar or
Bass Performances
* For instructions on how to stop playback or overdubbing, refer to “Technique for Stopping Operation” (p. 6).
On the RC-2, the process of recording an additional performance while a recorded performance plays back is called overdubbing.
3. Press the pedal to
start recording.
Lights in
red
Play.
Play.
2. Turn the MODE
knob to .
4. Press the pedal to
stop recording
(the phrase plays
back after you stop).
Lights in
green
5. Press the pedal to
start overdubbing.
INPUT
1. Select an
empty
phrase track.
Lights in
yellow
Press twice
Light goes
off
6. Press the pedal twice
to stop playback.
Lights in
green
Press the pedal to stop
overdubbing
(the phrase plays back
after you stop).
RC-2_e.book 13 ページ ２００６年１０月２７日 金曜日 午前１０時３１分

Boss RC-2 Specifications

General

Type	Loop Station
Maximum Recording Time	16 minutes
Number of Phrases	11
Technology	Digital
Sampling Frequency	44.1 kHz
Input Impedance	1 M ohm
Output Impedance	1 k ohm
Inputs	1 x 1/4"
Outputs	1 x 1/4"
Power Supply	9V DC
Dimensions	73 mm (W) x 129 mm (D) x 59 mm (H)
Weight	1 lb.
Connectors	Input, Output, AC Adapter, Aux In