Boss RC-2 User Manual

18
Recording After Setting the Tempo with the Pedal
* For instructions on how to stop playback or overdubbing, refer to “Technique for Stopping Operation” (p. 6).
2. Turn the MODE
knob to .
INPUT
1. Select an
empty
phrase track.
6. Press the pedal to
stop recording
(the phrase plays
back after you stop).
Lights in
green
Play.
Lights in
yellow
Lights in
green
Press twice
Light goes
off
8. Press the pedal twice
to stop playback.
Press the pedal to stop
overdubbing
(the phrase plays back
after you stop).
7. Press the pedal to
start overdubbing.
3. Press the pedal
several times in
time with the tempo.
Press several times
4. Hold down the pedal
for two seconds to set
the tempo.
Flashes rapidly
in yellow
Hold down two seconds
Play.
Lights in
red
5. Press the pedal to
start recording.
RC-2_e.book 18 ページ ２００６年１０月２７日 金曜日 午前１０時３１分

Boss RC-2 Specifications

General

Type	Loop Station
Maximum Recording Time	16 minutes
Number of Phrases	11
Technology	Digital
Sampling Frequency	44.1 kHz
Input Impedance	1 M ohm
Output Impedance	1 k ohm
Inputs	1 x 1/4"
Outputs	1 x 1/4"
Power Supply	9V DC
Dimensions	73 mm (W) x 129 mm (D) x 59 mm (H)
Weight	1 lb.
Connectors	Input, Output, AC Adapter, Aux In