17
Using AUTO Mode to Automatically Start Phrase Recording with Audio Input
1.
Turn the PHRASE SELECT knob to select an
empty phrase track (1-11).
2.
Set the MODE knob to AUTO.
If recording in time with the tempo, you can press the
TAP TEMPO button several times to set the tempo.
(Loop Quantize (p. 34) is enabled after the tempo is set.)
When the tempo is set, the guide starts playing; adjust
the volume level of this sound with the GUIDE knob.
3.
Press the pedal to put the RC-2 into record-
ing standby.
The REC/PLAY/DUB indicator flashes rapidly in red.
Pressing the pedal once while the unit is in recording
standby cancels recording.
4.
Begin your performance.
The RC-2 starts recording as soon as it receives audio input.
5.
Press the pedal to stop recording.
Playback of the recorded phrase begins simultaneously.
6.
If you want to overdub onto the phrase,
press the pedal.
Each subsequent pedal press toggles between playback
and overdubbing modes.
* You can undo and redo the most recently recorded overdub
(Undo/Redo; p. 15).
7.
When you are finished with playback or
overdubbing, press the pedal twice.
* Be sure to press the pedal two times within an interval of one
second.
* For more details on saving, refer to “Saving Phrases
(WRITE)” (p. 32).
RC-2_e.book 17 ページ ２００６年１０月２７日 金曜日 午前１０時３１分
To Next Page
Loading...
Need help?
General
