Boss RC-300 Loop Station - Page 30

Using LOOP FX
30
TRANSPOSE setting
Parameter Value Explanation
FX:Transpose
+1
-12–+12
Specify the amount of transposi-
tion in semitone units that will
occur when the eect is on.
With a setting of +12, the pitch
will be one octave higher when
the eect is on.
FLANGER, PHASER settings
Parameter Value Explanation
FX:Rate
25
0–100,
4 MEAS–
Adjusts the speed of the eect.
FX:Depth
50
0–100 Adjusts the richness of the eect.
FX:Manual
75
0–100
Adjusts the band to which eect
is applied.
FX:Resonance
80
0–100 Adjusts the intensity of the eect.
FX:Gate Rate
OFF
OFF, 1–100,
4 MEAS–
* FLANGER only
Species the operating speed of
the gate.
FX:Step Rate
OFF
OFF, 1–100,
4 MEAS–
* PHASER only
Adjusts the rate of the stepwise
change in the phaser eect.
PAN settings
Parameter Value Explanation
FX:Wave
0
0–100
Adjusts the curve for pan
position changes. Higher values
produce steeper change.
FX:Rate
50
0–100,
4 MEAS–
Adjusts the rate of change in the
pan position.
FX:Depth
100
0–100
Adjusts the intensity of the
change in the pan position.
TREMOLO settings
Parameter Value Explanation
FX:Wave Shape
100
0–100
Adjusts the curve for changes in
the volume level. A higher value
makes the change more abrupt.
FX:Rate
85
0–100,
1 MEAS–
Adjusts the speed of the eect.
FX:Depth
50
0–100 Adjusts the intensity of the eect.
SLICER settings
Parameter Value Explanation
FX:Mode
P01
P01–P10
Selects the slice pattern used to
cut the sound.
FX:Rate
50
0–100,
1 MEAS–
Species the rate at which the
16-step sequence will repeat.
FX:Dir.Mix
50
0–100
Controls the volume of the direct
sound when the eect is on.
BEND settings
Parameter Value Explanation
FX:Pitch
+1 OCT
-3 OCT–+4 OCT,
-2 OCT & VIBRATO,
+2 OCT & VIBRATO,
-2 OCT & +2 OCT
Species the amount of
pitch shift.
FX:Rise Time
50
0–100
Species the time over
which the specied pitch
is reached (the RISE time)
starting when you turn
the eect on/o.
FX:Fall Time
50
0–100
Species the time over
which the modied pitch
returns to the original
pitch (the FALL time)
starting when you turn
the eect on/o.
CHORUS settings
Parameter Value Explanation
FX:Rate
40
0–100,
1 MEAS–
Adjusts the speed of the eect.
FX:Depth
50
0–100 Adjusts the richness of the eect.
FX:E.Level
100
0–100
Adjusts the volume level of the
eect.
ROBOT, FEMALE, MALE settings
Parameter Value Explanation
FX:Pitch
C
C, C#–B
* ROBOT only
Species the key for the robot
voice.
FX:Color
1
1–10
* FEMALE and MALE only
Adjusts the vocal character.