6
Easy Quick Guide
Taking Advantage of the VE-5
1
Adjusting the Spaciousness (Delay/Reverb)
Delay is an echo-like eect. Reverb is the sense of spaciousness and reverberation you can experience
when singing in a room or hall. Here’s how to adjust the depth of these eects.
page 14
2
Using Harmony
“Harmony” lets you add a natural-sounding harmony part to your own voice.
page 14
Turning the Harmony on/o
Matching the harmony to the key of your song
Adjusting the volume of the harmony
1. Use the [ ] [ ] buttons to select “DlyLevel” or “RevLevel.”
2. Turn the [SOUND] knob to adjust the delay/reverb level.
DlyLevel 10
* If you want to turn o, set Level to 0.
3. Press the [EXIT] button to return to the top screen.
To apply the harmony eect, press the
[HARMONY] button so it’s lit.
Factory preset sounds no. 13–14 were
created for use with harmony. Let’s try out
the harmony eect.
Lit when on
Specify the key of the song you’re singing. For example, choose
“C” if the song is in C-major, or “Am” if the song is in A-minor.
The notes generated by harmony or pitch correction (p. 16) will
be based on the key you specify here, so be sure to specify
the correct key.
1. Use the [
] [ ] buttons to select “Key.”
2. Turn the [SOUND] knob to set the key.
Key C
3. Press the [EXIT] button to return to the top screen.
The VE-5 lets you layer a harmony part onto your own voice. Here’s how to adjust the volume of the harmony part.
1. Use the [
] [ ] buttons to select “HrmLevel.”
2. Turn the [SOUND] knob to adjust the volume of the harmony.
HrmLevel 83
3. Press the [EXIT] button to return to the top screen.
Major
Major
Minor
Minor
How the key of the song corresponds with the key signature ( , )
Your own
voice
Harmony
part
To Next Page
Loading...
Need help?
General
Weight and Dimensions
