Bostitch N64C User Manual

OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
N64C
COIL-FED PNEUMATIC NAILERS
CLAVADORA NEUMÁTICA ALIMENTADA POR ROLLO
CLOUEURS PNEUMATIQUES À ENROULEMENT
103694 REVH 9/04
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI
VOUS AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
STANLEY FASTENING SYSTEMS

Bostitch N64C Specifications

General

Brand	Bostitch
Model	N64C
Category	Nail Gun
Language	English

Summary

Safety Instructions

Eye Protection

Conforms to ANSI Z87.1, provides frontal and side protection against flying particles.

Operating and Handling Safety

N64C Tool Specifications

Operating Pressure

Recommends the optimal pressure range for best performance.

Loading the N64C Series Coil Nailer

Safety During Loading

Essential safety rules to prevent accidental injuries while loading.

Loading Procedure

Tool Operation

Contact Trip Operation

Sequential Trip Operation

Operational Safety Warnings

Critical warnings for safe operation, including trigger hold and body proximity.

Tool Operation Check

Contact Trip Operation Check

Verification steps to ensure correct operation of contact trip models.

Sequential Trip Operation Check

Verification steps to ensure correct operation of sequential trip models.

General Safe Operation Rules

Additional important safety guidelines for tool usage.

Maintaining the Pneumatic Tool

Assembly Procedure for Seals

Air Supply-Pressure and Volume

Trouble Shooting

Coil Nailers Troubleshooting

Fastener Depth Control Adjustment

Adjustment Procedure

Step-by-step guide for adjusting the nail drive depth control.

Warning

N64C Driver Maintenance Instructions

Driver Maintenance