Bostitch N79WW User Manual

BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS
AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
N79WW/N80SB
PNEUMATIC STICK NAILERS
CLAVADORA NEUMÁTICA ALIMENTADA POR BARRA
CLOUEUR PNEUMATIQUE À CARTOUCHE
103585REVK 11/05
STANLEY FASTENING SYSTEMS L.P.

Bostitch N79WW Specifications

General

Brand	Bostitch
Model	N79WW
Category	Nail Gun
Language	English

Summary

SAFETY INSTRUCTIONS

AIR SUPPLY AND CONNECTIONS SAFETY

LOADING TOOL SAFETY

OPERATION SAFETY

Safety warnings and best practices for operating the pneumatic tool safely.

MAINTENANCE SAFETY

OPERATION MODES

CONTACT TRIP OPERATION

Explanation of the Contact Trip operation mode for rapid fastener placement.

SEQUENTIAL TRIP OPERATION

Explanation of the Sequential Trip operation mode for precise fastener placement.

LOADING THE N79WW/N80SB

LOADING SAFETY PRECAUTIONS

FASTENER DEPTH CONTROL ADJUSTMENT

ADJUSTMENT PROCEDURE

Step-by-step instructions for adjusting the nail depth control for desired drive depth.

TOOL OPERATION

BEFORE HANDLING OR OPERATING STEPS

CONTACT TRIP OPERATION DETAILS

Detailed explanation of how to operate the tool in Contact Trip mode for single or rapid firing.

SEQUENTIAL TRIP OPERATION DETAILS

Detailed explanation of how to operate the tool in Sequential Trip mode for precise fastener placement.

TOOL OPERATION CHECK

CONTACT TRIP OPERATION CHECK

SEQUENTIAL TRIP OPERATION CHECK

GENERAL SAFE OPERATION GUIDELINES

MAINTAINING THE PNEUMATIC TOOL

AIR SUPPLY IMPACT ON MAINTENANCE

TROUBLE SHOOTING

AIR LEAKS AND CYCLING ISSUES

Diagnosing and correcting air leaks, failure to cycle, or slow operation of the tool.

FASTENER FEED AND JAMMING PROBLEMS

Solutions for skipping fasteners, intermittent feeding, and jammed fasteners within the tool.