Boston Scientific Vercise DBS Series User Manual

Technical Support
Physician Manual
91098825-02 71 of 337
en
BS EN 60601-1-2 Classication Information
Testing to demonstrate compliance of the Vercise™ System with the essential
requirements and other relevant provisions of Directive 1999/5/EC were leveraged
from testing performed on the Precision™ SCS System.
• Internally powered
• Continuous operation
• Ordinary equipment
• Class II
Table 1: Guidance and manufacturer’s declaration – electromagnetic emissions
The Vercise System is intended for use in electromagnetic environment specied
below. The customer or the user of the Vercise System should assure that it is used
in such an environment.
Emissions Test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1 The Vercise System uses RF energy only
for its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B The Vercise System is suitable for use in
all establishments, including domestic
establishments and those directly connected
to the public low voltage power supply
network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not
Applicable
Voltage uctuations/
icker emissions
IEC 61000-3-3
Not
Applicable
Hereby, Boston Scientic declares that the Vercise System is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.

Boston Scientific Vercise DBS Series Specifications

General

Brand	Boston Scientific
Model	Vercise DBS Series
Category	Medical Equipment
Language	English