Boston Scientific Vercise DBS Series User Manual

The Remote Control
Physician Manual
91098825-02 47 of 337
en
Remote Control Position
You will achieve a strong communication link between the Remote Control and the
implanted Stimulator if the Remote Control is positioned as shown in the picture
below.
In some situations, you may need to bring the Remote Control closer to the
Stimulator. The distance at which you will be able to achieve communication
depends on your environment and the relative orientation of the Remote Control
to the Stimulator.
Stimulator Linking
A Remote Control is restricted to communicating with one Stimulator at a time in
order to prevent it from inadvertently controlling an unintended device. Therefore,
the Remote Control must be linked with the Stimulator before use.
If the Remote Control is linked to a different Stimulator, you will need to clear the
link before linking it to the new Stimulator. See Selection #3 – Clear Link in the
Clinician Options section.
The initial step in the linking process involves the Remote Control identifying, by
telemetry, the intended Stimulator for communication. The second step in establishing
the link depends on whether:
• The Stimulator is an External Trial Stimulator or an implantable Stimulator.
• Programs are stored in either the Remote Control or Stimulator.
• The Remote Control and Stimulator contain different program sets (if so, one
set will need to be cleared).

Boston Scientific Vercise DBS Series Specifications

General

Brand	Boston Scientific
Model	Vercise DBS Series
Category	Medical Equipment
Language	English