EasyManua.ls Logo

Bounty Hunter Tracker II - Troubleshooting Common Issues; No Power or Sounds; Erratic Chatter or Beeps; Beeps at End of Sweeps

Bounty Hunter Tracker II
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
TROUBLESHOOTING
TROUBLE SHOOTING GUIDE
SYMPTOM CAUSE SOLUTION
No power, no • Dead batteries • Replace batteries
sounds
Batteries not • Securely snap
connected properly
batteries on to
connectors
Detector chatters • Electromagnetic • Stay away from
or Beeps Erratically Interference Power lines or
operating machinery
• Using Indoors • Use Outdoors Only
• Using Near Another • Keep 2 detectors at
Metal Detector least 20 feet apart
• Wrong Type of Batteries • Use 9-Volt ALKALINE
batteries only
(
do not
use heavy duty batteries)
• Sensitivity Set Too High • Reduce Sensitivity
for Environment
Detector Beeps at End • Improper Sweep • Sweep Coil Parallel to
of Sweeps Technique – Swinging Ground
(false signals)
Coil Like a Pendulum
Many False Signals in • Detector Not Ground • Ground Balance
the Field Balanced Correctly Detector per P.8
instruction
• Sensitivity Too High • Reduce Sensitivity
• Oxidized Targets • Only Dig Up
Repeatable Signals
• Increase
Discrimination Level
(turn control
clockwise)

Related product manuals