Bowflex SelectTech 2080 - Optional Accessories; Exercise Videos; SelectTech 2080 Stand with Media Rack; SelectTech 2080 Weight Upgrade

Use a second person to move the barbell and base together. To lift the barbell and base together, grasp each end of the base
assembly under the base tubes. Make sure that you and others are all physically fit and able to move the equipment safely.
If the barbell locking mechanism operates unsatisfactorily in the test procedure above, do the following:
1. Stop use of the product immediately until approved service is available.
2. Contact Customer Service (if inside US/Canada) or your local distributor (if outside US/Canada).
Exercises
For instructions on working out with the Bowflex
™
SelectTech
™
2080 Barbell with Curl Bar, you can watch the exercise videos provided online at:
http://www.bowex.com/2080
http://www.bowex.ca/2080
http://global.bowex.com/2080
Optional exercise bench and mat are available separately.
Additional products are available from Nautilus, Inc. at www.nautilusinc.com
Bowflex
™
SelectTech
™
2080 Stand with Media Rack
This attractive stand features an ergonomic design to enhance the functionality of the SelectTech
™
barbell.
• The design allows the user to maintain proper upper body
position while lifting or replacing the barbells in the base.
• Cradle for unused 20lb bar (curl or barbell). Additional cradle
eases transitioning from one bar to another.
• Large adjustable stabilizer feet assure maximum stability.
• Integrated media rack.
• Dimensions (with 80-lb barbell): 150.1 cm L x 60.5 cm W x
81.5 cm H (59.3” L x 11.7” W x 12.7” H)
Bowflex
™
SelectTech
™
2080 Weight Upgrade
The 40-lb Weight Upgrade kit allows for upgrade of the SelectTech
™
2080 barbell system to 120 lbs total (54 kg).
• The 8 weight plates (4 plates on each side) increase the weight in 10-lb increments for
each pair of plates.
• The additional plates seat within the original base.
• The existing weight selection dial already provides increments for up to 120 lbs in the
original product. The 90 – 120 lbs increments are used for the 40-lb Weight Upgrade
kit.
Optional Accessories
Optional Accessories
Owner’s Manual
12