BRADEN CH280 - Model Identification; Explanation of Model Number

4
CH Construction hoist
210 21,000–lb. rst-layer line pull
A Model series relating to design changes
36 Total gear reduction
110 Hydraulic motor displacement in cubic inches/revolution (decimal point eliminated,
example: 110–11.0 cubic inches/revolution)
01 Drum option
1 Permits testing and inspection per API 2C for o󰀨shore cranes
Model number
and
Serial number
MODEL NUMBER AND SERIAL NUMBER
When information on a hoist is needed, always refer to
the model number and serial number. Both are located
on the top of the motor-side end plate as indicated above.
EXPLANATION OF MODEL NUMBER
CH 210 A - 36 110 - 01 - 1
Construction
Hoist
Max
Rating
Design
Model
Gear
Ratio
Motor
Size
Drum
Size
Option
MODEL IDENTIFICATION