_______________________________________________________________________
4 Introduction
Cartridge Slots: One Cartridge Slot (Memory)
Standard DRAM: 512KB w/203DPI, 1 MB w/300DPI
Standard EPROM: 2048KB w/203 DPI, 2048KB w/300DPI
Counters: 2 Linear Inch Counters; one absolute and one
resettable
Interface: RS232, RS422 @ 300 -19,200 baud, XON/XOFF,
CTS/RTS
Dimensions: 11.38" H x 10" W x 18.25" D (289mm H x 254mm W
x 463mm D)
Operating
Temperature: 40° F to 105° F (5° C to 40° C)
Power Source: 115 VAC or 230 VAC 60HZ/50HZ
Additional Options
LCD/Keypad: Front panel with a 2 row x 16 character LCD display
and a 6 key operator's keypad
DRAM: Expandable to 4MB (via a daughter board)
256KB/512KB Permanent Storage of Custom Fonts, Graphics, and
Flash Cartridge: Formats
Cutter with Tray: Maximum Thickness: 0.010" (.254mm)
Internal Rewinder: 5½" maximum O.D. capacity with no core
Twinax/Coax: Supports IBM Mid-range and Mainframe Computers
High Speed Interface: IEEE Parallel Interface plus Serial I/F up to 56K BPS
Present Sensor: On-demand label dispensing
Internal Batch: Cartridge with VT 100 emulation and storage
Cartridge with Link MCII emulation and storage
To Next Page
Loading...
