_____________________________________________________________________________________________________
Appendix B B-1
Appendix B
Available Fonts and Bar Codes
All character fonts and bar codes available with the Printer are described in this
section. Each font and bar code has a name associated with it for use in
programming. Human-readable fonts have numeric names while bar code fonts
have alpha names. Uppercase alpha names will print bar codes with human-
readable interpretations, while lowercase alpha names will print bar codes only.
Fonts 0 through 8 use the slash zero (Ø) conventions for distinguishing
between the zero and the letter O. The slash can be removed with the label
formatting command Z. These fonts are non-proportional (monospaced) fonts,
all of the characters take up the same amount of space when printed. This is
helpful when using variable data in a fixed area. The sizes of these fonts are
shown in Table B-1.
The Triumvirate font number 9 is a proportional font, each character will take
up a different amount of space when printed. For example, the letter W will be
larger than the letter I.
There are 29 scalable font symbol sets that are accessible:
(US) ISO 6: ASCII Symbol Set, font code S00
(DN) ISO 60 Danish / Norwegian Symbol Set, font code S00
(IT) ISO 15: Italian Symbol Set, font code S00
(GR) ISO 21: German Symbol Set, font code S00
(FR) ISO 69: French Symbol Set, font code S00
(E5) ISO 8859/5 Latin 5 Set, font code S00
(E2) ISO 8859/2 Latin 2 Set, font code S00
(E1) ISO 8859/1 Latin 1 Symbol Set, font code S00
(DT) DeskTop Symbol Set, font code S00
For a complete list of the scalable fonts symbol sets, ASCII codes, and charts,
please refer to the Programmer's Manual.
To Next Page
Loading...
Need help?
General
