DIGIMIC®
DCen mini
Copyright by BRÄHLER ICS AG 7
Important remarks
Safety
Should any liquid or solid object fall into the housing, unplug the unit and have it checked by qualified
personnel before further operation.
Installation
Do not install the unit in a location near heat sources such as radiators or air ducts, or in a place exposed to
direct sunlight, excessive dust or humidity, mechanical vibration or shock.
To avoid moisture condensations do not install the unit where the temperature may rise rapidly.
Cleaning
To keep the housing in its original condition, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use organic solvents such as
thinners or abrasive cleaners since these will damage the housing.
Repacking
Save the original shipping carton and packing material; they will become handy if you ever have to ship the
unit.
For maximum protection, re-pack the unit as originally packed from the factory.
If not supplied with the equipment, a complete transportation and storage box system is available from
BRÄHLERICS. We recommend you to use this system for long-term protection and care.
General
Please keep this manual together with the equipment. If you pass on the unit to other parties, please include
this manual.
Please read the manual carefully, taking special care when you see this symbol as
indicates important information!
This product conforms to the rules of the following European regulations:
2004/108/EG
Council directive to the alignment of the rules, of rights of all member states about the electromagnetic
compatibility, adapted through RL 91/263/EWG, 92/31/EWG and 93/68/EWG of the council. Further
information is available on request.
To Next Page
Loading...