Brähler Systems DIGIMIC DCen mini - Introduction

DCen mini DIGIMIC®
8 Copyright by BRÄHLER ICS AG
Introduction
Thank you for your confidence in the conference technology of Brähler!.
The Central Control Unit DCen mini controls all connected delegate units (CMic/CChair as well as
DMic/DChair) of the DIGIMIC discussion system, configures them automatically and routes the digital audio
signals. As a stand-alone unit the DCen mini includes 3 microphone modes:
 AUT3 (push to talk up to 3 delegates)
 VOX (VAL limited: voice activation up to 3 simultaneous activated microphone units)
 FLOAT (AUTF3, the first of three speakers will be replaced by the last speaker.)
The DCen mini has one CMic outlet to connect up to 25 delegate units.
Once a unit is connected to the central control unit it is ready to use immediately without any further
adjustment. For additional functionalities the DCen mini is equipped with a network interface to ensure
remote control from various applications via PC, e.g. DMicControl software for microphone control on a
geographical virtual microphone mimic and name handling.
Voting functionality with up to 5 voting buttons can be achived with CMic CSV delegate units and DIGIVOTE
basic interactive PowerPoint voting software.
Please read this manual carefully, to get access to all features of the DCen mini central unit.