(-328 ~ 1652 ˚F)
PT100 -210 ~ 700 ˚C ±0.4 ˚C 1.3KΩ
(DIN) (-346 ~ 1292 ˚F)
PT100 -200 ~ 600 ˚C ±0.4 ˚C 1.3KΩ
(JIS) (-328 ~ 1112 ˚F)
mV -8 ~ 70mV ±0.05% 2.2MΩ
mA -3 ~ 27mA ±0.05% 70.5Ω
0~1V -0.12 ~ 1.15V ±0.05% 332KΩ
0~5V -1.3 ~ 11.5V ±0.05% 332KΩ
1~5V -1.3 ~ 11.5V ±0.05% 332KΩ
0~10V -1.3 ~ 11.5V ±0.05% 332KΩ
Analog Input Cards (AI183V)
Characteristics:
Type Range Accuracy Input
at 25 ˚C
Impedance
-60~60mV -62~62mV ±0.1% 2.2 MΩ
-2~2V -2.2~2.2V ±0.3% 332KΩ
-20~20 V -22~22 V ±0.1% 332KΩ
-20~20 mA -22~22 mA ±0.1% 70.5Ω
Digital Input Card (DI181)
Channels: 6 per card
Logic Low: -5V minimum, 0.8V maximum
Logic High: 2V minimum, 5V maximum
External pull-down Resistance: 1KΩ maximum
External pull-up Resistance: 1.5MΩ minimum
Digital Output Card (DO181)
Channels: 6 per card
Contact Form: N.O. (form A)
Relay Rating: 5A/240 VAC, life cycles 200,000 for resistive load
Analog Output Card (AO183I, AO183V)
Channels: 3 per card
Output signal: AO183I: 4-20mA, 0-20mA, AO183V: 0-5V, 1-5V, 0-10V
Resolution: 15 bits
Accuracy: ±0.05% of Span ±0.0025% /˚C
Load Resistance: 0-500 ohms (current), 10K ohms minimum (voltage)
Output Regulation: 0.01% for full load change
Output Setting Time: 0.1 second (stable to 99.9%)
Isolation Breakdown Voltage: 1000VAC min.
Integral Linearity Error: ±0.005% of Span
Temperature Effect: ±0.0025% of Span /˚C
24VDC Auxiliary Power Supply Card (AP181)
Channels: to be used for 6 transmitters
Output Rating: 24 ± 1 VDC, 180mA in maximum, 30mA / each channel
To Next Page
Loading...