Need help?Do you have a question about the Brainchild VR06 and is the answer not in the manual?
General| Brand | Brainchild |
|---|---|
| Model | VR06 |
| Category | Voice Recorder |
| Language | English |
Describes safety symbols used in the manual.
Lists important safety guidelines and precautions.
Precautions for handling components to prevent ESD.
Instructions for replacing the power fuse.
Highlights key features and capabilities of the VR06.
Details the types and functions of plug-and-play I/O cards.
Describes standard and optional communication methods.
Information on the 2GB CF card used for storage.
Explains the security of recorded data.
Describes the IR sensor's function for screen saving.
Lists part numbers and available accessories.
Explains the breakdown of the VR06 ordering codes.
Guidance on what to do if damage is found during unpacking.
Specifies the recommended operating environment and conditions.
Details the required panel cutout dimensions for mounting.
Instructions for assembling the bench top or portable configuration kit.
Guide on configuring universal analog input cards.
Guide for configuring the AI183V analog input card.
Instructions for setting up the digital output card.
Instructions for setting up the digital input card.
Describes the use of analog output cards.
Details the function of the auxiliary power card.
Essential warnings and guidelines for wiring the cards.
Diagram and explanation of the rear terminal connections.
Visual guides for wiring analog input cards.
Connection diagram for the digital input card.
Connection diagram for analog output cards.
Wiring diagram for the AP181 power supply card.
Details on connecting and configuring RS-232 communication.
Diagram for RS-422 communication wiring.
Diagram for RS-485 communication wiring.
Instructions for inserting and removing the CF card.
Explains the function of the soft keys on the recorder.
Describes how to navigate between display pages.
Explains the different display modes available.
How to view and navigate historical trends.
How to view and acknowledge events and alarms.
How to generate and view reports.
How to check the present status of inputs/outputs.
How to exit current operations.
Procedure for transferring data to the CF card.
How to clear non-significant data.
How to start a job manually.
Proper way to shut down the recorder.
For security features.
Explains the meaning of icons on the display.
Overview of the configuration mode and available soft keys.
Detailed steps for configuring analog inputs.
Detailed explanation of parameters like Log Speed, Offset, Gain, etc.
How to set up events and alarm types.
Explains available jobs and hysteresis settings.
How to configure digital inputs.
How to configure analog outputs.
How to configure mathematical functions.
Lists available math expressions and provides an example.
How to configure display modes, colors, and pens.
How to enable items in the status bar.
How to set up timers.
Example of using timers and generating reports.
How to set up counters.
How to set up totalizers.
Example of timer and totalizer usage.
Name, language, event limit, security settings.
Settings for LCD, sensor, and communication interfaces.
How to configure Ethernet IP settings.
How to set the local date and time.
Explains normal vs. CFR-21 security and user roles.
Shows system version, memory, and slot status.
How to update the recorder's firmware.
A practical example of configuring the recorder.
Overview of the PC software and its components.
Details on using the configuration viewer.
How to manage projects within the Observer software.
Choosing between CF card, Ethernet, or RS232.
Steps for configuring Ethernet IP settings and connections.
Steps for configuring the PC's network adapter.
Manually configuring IP, subnet mask, and gateway on the recorder.
Explains straight-through and crossover Ethernet cables.
Steps to select Ethernet and enter IP address.
How to resolve communication failures.
Steps for configuring serial communication ports.
Ensuring the RS 232 port is available on both recorder and PC.
Manually setting communication details.
Configuring parameters like Node Address, COM Port, Baud Rate.
Troubleshooting issues with RS 232 connections.
Verifying COM port settings in the PC's device manager.
Making sure recorder and PC RS 232 settings match.
Steps for saving, reading, and troubleshooting CF card configurations.
How to save recorder settings to the CF card.
Using a CF reader and Observer software to read configurations.
Browsing and selecting the folder containing CF card data.
Resolving issues when configuration files are not found.
Defining configuration settings for the Real-Time Viewer.
Defining configuration for the Real-Time Viewer.
Setting up email notifications for alarms.
Options for sharing data and network configuration.
Setting up SMTP server details for email alerts.
Setting the data display interval for real-time monitoring.
Modifying communication channels for the viewer.
Creating a DDE link to exchange data with Excel.
Activating DDE and understanding the data format.
Troubleshooting issues like "Error" or "NAME" text in Excel.
Exchanging data with other applications like PLCs.
Configuring DDE with SCADA systems.
Setting up tags in SCADA for DDE.
Demonstrates converting level to flow using math functions.
Setting timers for start/stop logging.
Connecting via SMS using an analog output card and GSM controller.
Commands to get real-time values and alarm status via SMS.
A flowchart to diagnose and resolve issues.
Locating key components mentioned in the flowchart.
Steps to take if an IO card is not detected.
Maximum and minimum scale values for analog and math inputs.
Maximum distance for Ethernet communication.
Maximum distance for wireless Ethernet communication.
Information about the internal battery.
Factors affecting the accuracy of the real-time clock.
Types of security available.
Information about Boot ROM and its relation to math options.
How to upgrade the recorder system and PC software.
Comparison of Observer I and II software.
How many cards can be inserted.
Information on CF card compatibility.
How many recorders can be seen in the viewer.
How to reset the recorder if the password is forgotten.
Steps after changing dip switches on an analog input card.
Which Ethernet cable to use.
How long data can be stored on a CF card.
How to show all selected channels on a single page.
How to print data, and troubleshooting print errors.
Number of these features available.
Using digital inputs for counting applications.
What to do if REALTIME_VIEWER.exe encounters a problem.
How to back up data to a CD.
Files to send to the supplier for configuration issues.
Whether the recorder can supply DC power.
Troubleshooting communication setup problems.
What to do if historical data is not appearing in Excel.
Using math application for pulse counting.
Error message in Real-time viewer.
Troubleshooting DDE issues after updates.
Exchanging data over a local network.
Solution for the clock running fast.
To Next Page