16 Tjekliste for sikkerhedstjek USA.fm • Page 42Bale press X-series
Safety check carried out on ________________
Signature: _______________________________
Check door switch (N) (only AD models)
Then press the green start button (B).
When the baler is running, press with one hand on the top of
the closed AD door (R).
When the AD door (R) is pressed down in this way, the baler
should stop immediately.
Release the pressure so that the AD door (R) springs into
place and the press continues its cycle.
Check the closing system on door (F) (not AD models)
Open door (F) and check that the closing system works
correctly.
To Next Page
Loading...
