Branson 900IW+ Series - Mechanical

B.3 Mechanical
Pneumatic Requirements: 
Clean (5 micron), dry air at
35-100 psig/240-690 kPa max. 6 SCFM
Maximum Force on Part:
9051W+ & 910IW+

440 lbs at 100 psig/1.96 kN at 690 kPa
920IW+

630 lbs at 100 psig/2.8 kN at 690 kPa
Cylinder:

905/910IW 2-1/2 in.
920IW  3 in.
Dynamic Triggering
Range:  15 - 200 lbs/67 - 890N max.
Dynamic Follow-through
Range: 
15 - 200 lbs/67 - 890N max.
Stroke Length: 
4 in/101.6 mm max. (1/4 in/6.35 mm min.)
Cycle Rate:

65 ± 10 CPM at 1 in stroke length;
50 psig/345 kPa; 15 lb trigger force; approx.
2.16 in/sec / 55 mm/sec avg. velocity.
Weight: 
All models are approx. 145 lbs.
Orientation: 
Vertical (upright position)
Note: 
All specifications arc subject to change without notice.
9001W+ 
B-3 
Specifications