Need help?Do you have a question about the Branson 2000 series and is the answer not in the manual?
General| Frequency | 20 kHz |
|---|---|
| Control System | Microprocessor-based |
| Amplitude Control | Adjustable |
| Welding Modes | Time, Energy |
| Voltage Requirement | 220-240 VAC, 50/60 Hz |
| Weight | 25 kg |
Describes how to set up automation process options with Branson 2000 Series ultrasonic systems.
Lists 12 automation possibilities for Branson actuators, custom actuators, and converter stacks.
Explains user-configurable I/O, digital jacks, and J3 connector pin-outs for enhanced functionality.
Covers minimum system requirements for automated operation, including emergency stop and cycle abort functions.
Wiring and flow details for standard, external preset, delayed sonics, and sonics disabled automation.
Covers complex flows like disabled/presets, external select/delayed sonics, delayed horn travel, and interrupting cycles.
Guides for custom actuator, converter stack standard, and external preset select automation setup.
Provides answers to common questions on Branson automation, wiring, and system operation.
Defines key terms used in the automation guide for Version 9.xx.
To Next Page
