Braun Omnitest 3 - Automatic Coding of the Meter

- 15 -
Automatic Coding of the Meter
Insert Omnitest® 3 test strip to turn on the meter. A special
auto-coding label on the back side of the test strip calibrates
the Omnitest® 3 meter automatically. Before testing, make sure
that the code number of the test strip vial matches the code
shown on the meter. If these two code numbers match,
you can start testing.
Omnitest
®
3
Omni
t
3
fen
trips
mie
ps
test
Code
Control M
Mean
Control H
Mean
B. Braun Melsungen AG · O
34209 Melsungen · Germa
06/2019
C21
8
2
CODE?

/2019
C21