Braun Omnitest 3 - Transfer Test Results to a Computer

- 65 -
Transfer Test Results to a Computer
You can transfer test results from the Omnitest® 3 meter to
a computer, where the data can be further analyzed. To make
use of this feature, you need the Omnitest® 3 PC interface
cable REF 9152856G, as well as a link to the Online Diary
Omnitest® Center. The monitor will display ”PC“ as soon as
the cable is connected to the PC and the software is activated.
For further information see
www.omnitestcenter.com
Omnitest
®
3