Braun Omnitest 3 - Page 18

- 18 -
Battery
When changing batteries, pay attention to the polarity, which
is printed in the battery holder of the meter. The positive pole
of the batteries has to face up.
If the new batteries are inserted, at first all segments of the
display will be shown. Thereafter an internal check of the
electronic takes place in the following seconds.
Correct the date and time setting after the battery change.
B3MLG 2010/01
Omnitest
®
3 mmol/L
B. Braun Melsungen AG · OPM · Germany · www.bbraun.com
GKGBGBS00266
www.omnitest.bbraun.com
Omnitest
®
3
B3MLG 2010/01
Omnitest
®
3 mmol/L
B. Braun Melsungen AG · OPM · Germany · www.bbraun.com
GKGBGBS00266