Breitling EXOSPACE B55 - Synchro; Tilt; Light

2928
• Settheminutehand,andthenthehourhand,andconrmbypressingP1.
• Pressthecrownbacktoneutralposition1.
b)
TILT (oN or oFF)
• Selectthe
SETTING function by turning the crown.
• Pullthecrownintoposition2(thehourandminutehandswill“park”).
• Select
TILT by turning the crown.
• PressP1toactivatethesetting.
• Turnthecrowntoselect
oN or oFF (the default setting is oFF).
• ConrmthesettingbypressingP1and/orpressingthecrownbacktoneutral
position 1.
N.B.: On the lower screen, a counter indicates the number of tilts activated since
the last battery charge.
c)
LIGHT (SHoRT, MEDIUM or LoNG)
• Selectthe
SETTING function by turning the crown.
• Pullthecrownintoposition2(thehourandminutehandswill“park”).
• Select
LIGHT by turning the crown.
8.
MoDE: option of disabling the following functions: CHRFLGT, CDCUCLK and ALCU.
9.
CoNNECT: activation and deactivation of the BLE (Bluetooth
®
Low Energy)
connection.
Please note that as soon as the
SETTING mode is activated by pulling the crown into
position 2, the hour and minute hands “park” in order to facilitate the readability
of the two screens.
a)
SyNCHRo
The time shown on the analog display (hands) and that shown on the digital
display (screens) must be perfectly synchronized. In the event of the two displays
being completely out of synchronization (following a shock or accidental stop), the
analog display on the digital indicator is adjusted as follows:
• Selectthe
SETTING function by turning the crown.
• Pullthecrownintoposition2(thehourandminutehandswill“park”).
• Select
SyNCHRo by turning the crown.
• PressP1toactivatethesetting:thehandswillalignthemselvesonthedigital
display on the lower screen.
• Ifthereisaninconsistency,turnthecrowntopositionthesecondshandat12
o’clock and confirm by pressing P2.