Breitling EXOSPACE B55 - Rereading “Block Times”; “Block Time with Flight Time”; “Flight Time” Only

4948
e) The departure time on the lower screen with Bxx OFF (block-off) displayed on
the upper screen.
f) The take-off time on the lower screen with
BxxTKOF on the upper screen.
g) The landing time on the lower screen with
Bxx LDG on the upper screen.
h) The stop time on the lower screen with
Bxx ON (block-on) on the upper screen.
i) The flight time on the lower screen with
BxxFLyT on the upper screen.
j) The block time on the lower screen with
Bxx DUR on the upper screen.
k) And back to the display
Bxx ADD on the upper screen.
2. “Flight time” only
a)
The time reference (LOCAL time or UTC time) on the upper screen with Bxx
followed by LOCAL or UTC
.
b) The take-off date on the lower screen with BxxDATE on the upper screen.
c) Information regarding the take-off airport on the upper screen with
BxxFROM,
followed by the 4 character ICAO code (will display “
----“ if nothing has been
introduced); the lower screen displays
ICAO.
• Beforestartinganewrecording,aplaceinthememorymustbeactivatedbya
long press on P1: the lower screen displays
--:--:--.
N.B.:Onlyoneightcanbemeasuredatatime.
N.B.:Iftheightrecordingremainsinuseformorethan99hours,59minutesand
59 seconds, it willstop automaticallyand the upperscreen willdisplay
Bxx OVF
(foroverow).
d) Rereading “block times”
Oncetherecordingisnished,pressingP2willautomaticallyandsuccessivelydis-
play (3 seconds per display) the following parameters:
1. “Block time with flight time”
a) The reference time (
LOCAL time or UTC time) on the upper screen with Bxx fol-
lowed by
LOCAL or UTC.
b) The take-off date on the lower screen with
BxxDATE on the upper screen.
c) Information regarding the take-off airport on the upper screen with
BxxFROM
displayed, followed by the 4 character ICAO code (will display “
----“ if nothing
has been introduced); the lower screen displays
ICAO.
d) Information regarding the landing airport on the upper screen with
Bxx TO
displayed, followed by the 4 character ICAO code (will display “
----“ if nothing
has been introduced); the lower screen displays
ICAO.