Breitling EXOSPACE B55 - Synchronization and Time Zone Setup

5352
b) Use
Thereafter use is identical to the chronograph:
• StartbypressingP1(theupperscreendisplays
CD RUN or CU RUN)
• StopbypressingP1(theupperscreendisplays
CD SToP or CU SToP).
Restart possible by pressing P1.
• AlongpressonP2willresettotheoriginalsettings(
RESET).
In
CD RUN mode, the watch emits a beep every second during the 10 seconds before
time 0. An alarm that can be switched off (by pressing a pushpiece or on the crown)
then sounds at time 0 for 10 seconds, while the timekeeping continues; the upper
screen momentarily displays
CD0, and then CU RUN.
If the countup (
CU RUN) remains on for more than 99 days, 23 hours, 59 minutes and
59 seconds, the counter stops and the upper screen displays
CU oVF.
14. COUNTUP ALARM (
ALCU)
This function makes it possible to generate an alarm synchronized with the abso-
lute time of the countup. This is a unique or “mission” alarm.
a) Setting (
SETALCU)
• Selectthe
ALCU function by turning the crown.
13. COUNTDOWN COUNTUP CLOCK (
CDCUCLK)
The CDCUCLK (CountDown CountUp ClocK) function or MET (Mission Elapsed Time)
is used for more or less long term missions, or regattas, for example. It offers two
possibilities:
• Engage a countdown directly (with a duration that can be configured) and
timing:
C-DoWN function.
• Conduct“absolutetiming”withazeroornon-zerovaluestart(byaddingan
“offset”):
C-UP function.
a) Setting (
SETCDCU)
• SelecttheCDCUCLK function by turning the crown.
• Pullthecrownintoposition2(theupperscreenwillshow
SETCDCU)
• Byturningthecrown,selectcountdown(
C-DoWN) or countup (C-UP)
• ConrmbypressingP2.
• Adjustthenumberofdays(
DAy), hours (HoUR), minutes (MINUTE) and seconds
(
SECoND) of the countdown or countup by turning the crown, and confirming it
each time by pressing P2.
• Forthecountdown,adjustthetypeofalarmsignaldesired(
ALARM SIGNAL dis-
play):
BUZZER (sound alarm), VIBRATE (vibrating, silent alarm) or BoTH (both
together) by turning the crown and confirming by pressing P2.
• Pushthecrownintoneutralposition1.