5756
This is a very useful, practical function, especially for travelers going from one
timezone to another, as it means one always has easy access to the local time as
indicated by the hands.
c) An example using the SWAP function
TIME is set to Paris time (UTC+1), while TIME 2 is set to New York time (UTC-5). A
traveler who left Paris arrives in New York wishing to have the local time shown
by the hands. All he has to do, in
TIME 2 mode, is press on P1 and the hands will
immediately show New York time (
UTC-5), while TIME 2 displays Paris time (UTC+1
on the digital display only).
This exchange automatically modifies the date, if necessary, assuming that the two
TIME and TIME 2 zones were correctly set in terms of the difference with the UTC
zone. When the time comes to return to Paris, pressing P1 again (in
TIME 2 mode)
puts the two zones back to their original state (with the automatic date change
if necessary).
17. NOTIFICATIONS RECEIVED FROM THE SMARTPHONE (
NoTIFy)
The
NoTIFy function allows the watch to be configured in such a way that it
informs the user of forthcoming notifications arriving on the smartphone to which
it is connected.
1.
Phone call
CALL
displayed, followed by, if possible, the surname and name of
the caller or the phone number, with the time of the call.
16. SECOND TIMEZONE (TIME 2)
In addition to the UTC time (the base time of the watch) and the first (main)
TIME
zone, a second timezone
TIME 2 is available.
a) Setting (
SET T2)
The setting takes place in exactly the same way as the main
TIME zone (see chapter
6), according to the difference with the UTC time and in 15-minute increments
between
UTC-12 and UTC+14.
N.B.: in the
SET T2 mode setting, pressing P1 starts the seconds counter from 0.
The seconds counter stops only when the second is manually modified. In this case,
it starts again as soon as the adjustment setting is exited (when the crown is put
back to neutral position 1). The seconds are automatically synchronized on the UTC
and TIME zones.
A long press on P2 provides the option of choosing between the 12-hour (
T2 AM
or
T2
PM
) and 24-hour (
TIME
2
) display functions. The change also takes place automatically
for the
TIME
and the alarms.
b) SWAP Function
The
SWAP function allows the two timezones TIME and TIME 2 to be inversed on the
digital display and hands, taking a possible date change into consideration. This
“exchange” is done by simply pressing P1 when in
TIME 2 mode.
To Next Page
Loading...
