4746
• Whenthemachinestops,press P1afourthtime(thescreendisplaysBLoCKoN
followed by
Bxx ADD) and displays the block time. Pressing P1 again will continue
the recording, but in this case, only the block time will be incremented.
• Beforestartinganewrecording,aplaceinthememorymustbeactivatedwith
a long press on P1: the lower screen will display
--:--:--.
N.B.: Only one flight can be measured at once.
N.B.: If the flight recording remains in use for more than 99 hours, 59 minutes and
59 seconds, it will stop automatically and the upper screen will display
Bxx oVF (for
overflow).
c) Recording a “flight time” only
•
Select the
CHRFLGT
function by turning the crown; the seconds hand will
automatically move to 0 and become the chronograph hand. It will return to
normal as soon as the “flight time” chronograph mode is exited.
• Ifoneormoreblocktimesarealreadymemorized,aplaceinthememorymust
be activated before starting the new recording. This operation is achieved by a
long press on P1: the lower screen displays
--:--:--.
• StartthechronographbypressingonP1(theupperscreenwilldisplayTAKEoFF).
The lower screen displays the hours, minutes and seconds. The seconds hand of
the chronograph follows the digital second.
• StoptherecordingbypressingonP1asecondtime(theupperscreenwilldisplay
LANDING followed by Bxx ADD). Pressing P1 again will continue the recording.
• For
TIMEMST, turn the crown to select whether to record both times: block times
and flight times (
BLoCK) or only flight times (FLIGHT).
• ConrmthesettingbypressingP1and/orpushingthecrownbackintoneutral
position 1.
b) Recording a block time with the flight time
•
Select the CHRFLGT function by turning the crown; the seconds hand
automatically positions itself on 0 and becomes the chronograph hand. It
returns to its usual function when the “flight time’ chronograph mode is
exited.
• Ifone ormore“block times”arealready memorized,aspace in thememory
must be activated before starting a new recording. This operation is done by
pressing P1 for a long time: the lower screen displays
--:--:--.
• As soon as the machine begins to move, start the chronograph by pressing
P1 (the upper screen displays
BLCKoFF). The lower screen displays the hours,
minutes and seconds of the block time. The chronograph seconds hand follows
the digital seconds.
• Whentakingoff,pressP1asecondtime(thescreenwilldisplay
TAKEoFF) and
the counter at 6 o’clock will return to 0 (flight time).
• Whenlanding,pressP1athirdtime(thescreenwilldisplay
LANDING) and the
counter at 6 o’clock will stop and flash the flight time for ten seconds. The coun-
ter at 6 o’clock then displays the block time.
To Next Page
Loading...
