Breitling EXOSPACE B55 - Troubleshooting; List of Words in the User Interface

6362
20. LIST OF WORDS IN THE USER INTERFACE
The list below explains all the texts that may appear in the upper screen through
the user interface.
24H zone display in 24 hour mode
ALX AM alarm x activated in AM mode
ALX oFF alarm x deactivated
ALX oN alarm x activated
ALX PM alarm x activated in PM mode
ALXTEST testing alarm x
ALARM SIGNAL choice of alarm signal
ALCU countup alarm
ALCU oN countup alarm activated
ALCU oFF countup alarm deactivated
ALLDAyS alarm active every day
AM zone display in 12 hour ante meridiem mode
AM / PM 12 hour display with AM and PM indicator for TIME, TIME 2 and the alarms
ARABIC weekly format according to “Arabic” standard
BAT XX% battery charge status percentage
BAT100% battery fully charged
BATTERy battery mode
BEST XX best lap (in LAP mode)
BLCKoFF airplane departing
BLoCK block time and flight time option
BLoCKoN airplane stops
19. IN THE EVENT OF PROBLEMS
If the watch no longer responds or in the event of connection issues with the smart-
phone, the watch may require resetting, as follows:
• Selectthe
BATTERy function by turning the crown.
• Pull the crown to position 2; the upper screen displays
DEEP SLEEP or SoFT
SLEEP
; select DEEP SLEEP by turning the crown.
•
Give P1 a long press to confirm the extended standby. The hands will «park»
immediately. Once the procedure is finished, the display turns off and the
electronics are disconnected.
• Donotforgettopushthecrownbacktoneutralposition1.
• Toreactivatethewatch,connectthechargercable.Thewatchisthusreset.All
settings will be lost during this operation.
It is important to note that the watch’s connection with the smartphone may
become somewhat unstable when in presence of multiple Wi-Fi and/or Bluetooth
®
signals.