BREWART BREWFLO - Safety

BREWART BY COOPERS
4
Safety
Your BrewArt BrewFlo has been designed and manufactured to
the highest safety specifications and all relevant Australian and
New Zealand Standards (AS/NZS 60335.2.24:2010 Inc A1,
AS/NZS 60335.1:2011 Inc A1-2).
To ensure a safe, successful and rewarding experience please read these instructions
fully prior to use, and if you have any queries, do not hesitate to contact BrewArt
support on 1300 240 242 or at info@brewart.com
To prevent injury:
k Read all instructions before use.
k Remove packaging and safely
discard packing material.
k Only li or transport your
BrewFlo when it is empty. Always
use safe liing techniques.
k Keep your BrewFlo upright in
a cool, dry position away from
direct sunlight and heat.
k When not in use, keep machine
turned o at the power point.
k Keep all vents clear.
k Do not disassemble your
BrewFlo for any reason.
k Only use genuine
BrewArt accessories.
k Only use your BrewFlo for
dispensing BrewArt Kegs.
k Keep your BrewFlo away
from children and pets.
k Do not store explosive
substances such as aerosol
cans with a flammable
propellant in your BrewFlo.
k If the power cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons
in order to avoid a hazard.
k The BrewFlo is intended for
household and domestic use only.
k The BrewFlo is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack
of experience and knowledge,
unless they are supervised or
given instruction concerning the
use of the BrewFlo by a person
responsible for their safety.
k Only use a so damp cloth to wipe
down external surfaces. Do not
use solvents or harsh chemicals.
A mild detergent may be used.
k Failure to keep your BrewFlo
upright may result in damage to
its compressor cooling system.