BRIGHT OTF 5000 - Product Information; Introduction; Special Features; Configurations Overview

OTF 5000/HS/LS-001/2/3/4 Iss 4 June 2012
35
Quick-release type
50203 50690 50204
50203
Quick release object holder. Fits into a standard vice clamp and takes 50690
metal discs
50222-1
Quick release object holder. Complete with 50 off 50690 metal discs
50690
Metal object holder discs, 22mm dia. Fits 50203 quick release object holder,
Pack of 50
50204
Cork object holder discs, 22mm dia, pack of 100
50204-1
Cork object holder discs, 50mm dia, pack of 100
Orientating specimen holders
51695
Universal holder. This simple inexpensive device
will fit 5030 or 5040 microtomes that have fixed
heads. Any of the object holders shown below can
be fitted to give coarse orientation
50745 50720 50719
50718 50712
50745
Orientating object holder 5mm dia., for small specimens
50720
Orientating object holder 22mm dia., for medium size specimens
50719
Orientating object holder 37mm dia., for larger specimens
50718
Orientating object holder 50mm dia., for very large specimens
50712
Orientating object holder 50mm x 50mm, for very large specimens