BRIGHT OTF 5000 - Warranty and Initial Setup; Receipt and Unpacking

OTF 5000/HS/LS-001/2/3/4 Iss 4 June 2012
i
CONTENTS
SAFETY INFORMATION 1
CONSUMER PROTECTION 1
ELECTRICAL 1
MICROTOMES KNIVES/BLADES 1
OPERATION 1
LOW TEMPERATURES 2
ACCESSORIES 2
PRODUCT SAFETY SUGGESTIONS 2
DECONTAMINATION CERTIFICATES 2
WARNING 2
WARRANTY 3
1.1 RECEIPT AND UNPACKING 3
1.1.1 RECEIPT 3
1.1.2 UNPACKING 3
1.2 ASSEMBLY AND INSTALLATION 4
1.2.1 FITTING THE HANDWHEEL 4
1.2.2 DRAIN TUBE AND PLUG 4
1.2.3 INSTALLATION OF TRAYS AND SHELVES – FIG 2 4
1.2.4 FROST ELIMINATION COVER – FIG 3 5
1.2.5 INSTALLATION OF THE MICROTOME (and REMOVAL) 5
1.2.6 INSULATED NIGHT PLUG 6
1.2.7 /X - THIN SECTION CONVERSION KIT (where applicable) 6
1.2.8 /U - ULTRA VIOLET LIGHT DECONTAMINATION UNIT (where applicable) 6
1.2.9 /Y - GLOVE PORT (where applicable) 6
1.2.10 /V - FOOT SWITCH (where applicable) 6
1.2.11 POSITIONING 7
1.3 ELECTRICAL 7
1.3.1 SETTLING 7
1.3.2 ELECTRICAL REQUIREMENTS 7
1.3.3 ELECTRICAL SAFETY 7
2 OPERATING INSTRUCTIONS 8
INTRODUCTION 8
SWITCHING ON 8
2.1 CABINET CONTROLS 9
2.1.1 MAINS SWITCH (Located on side panel) 9
2.1.2 LIGHT SWITCH BUTTON 9