BRIGHT OTF 5000 - Accessories and Consumables

OTF 5000/HS/LS-001/2/3/4 Iss 4 June 2012
34
5 ACCESSORIES
5.1 OBJECT HOLDERS
A wide range of object holders is available as shown below:
Standard types
50727 50734-1 50734-2 50735-1
50735-2 50744 50721
50741 50743
50727
Standard tubular holder, 22mm dia. Fits Bright 5030 microtome only.
50734-1
Solid object holder, 22mm dia. Suitable for most applications
50734-2
Solid object holder 22mm long type, gives greater clearance between specimen
clamp and knife holder. Ideal for when multi-position glass slides are used.
50735-1
Object holder with stem, 37mm dia. Suitable for larger specimens.
50735-2
Object holder with long stem, 37mm dia. Suitable for larger specimens and gives
extra clearance.
50744
Object holder, 5mm dia. Suitable for small specimens, particularly where
orientation is required.
50721
Object holder with stem, 50mm dia. Suitable for very large specimens
50741
Object holder with stem, 50mm x 50mm square, suitable for very large specimens