OTF 5000/HS/LS-001/2/3/4 Iss 4 June 2012
39
5.8 CRYOSPRAY
Bright Cryospray 134 300ml
aerosol can.
Bright Cryospray 134 300ml
aerosol can, carton of 12 cans
Cryospray 134 is an aerosol-freezing agent and is 80 –
100% Tetrafluoroethane.
It is capable of delivering an aerosol jet at –52ºC for rapid
freezing of tissue. The container has a comfortable and
effective trigger grip and is complete with a 155mm nozzle
to direct a fine spray to its target.
WARNING: This product can cause frostbite if
unintentionally misused.
Please note that this product is not normally supplied with
cryostats for export outside the UK since, being a
pressurised container it is classed as hazardous goods for
shipments by air.
5.9 CRYO-M-BED
Bright Cryo-M-Bed 113ml bottle
Bright Cryo-M-Bed 113ml bottle, carton of 6 bottles.
Bright Cryo-M-Bed is a blend of polyviol alcohol 217, thymol and water.
It is an inert colourless viscous fluid which is totally transparent at room temperature. It becomes
opaque when frozen and turns white in colour. It shrinks slightly when frozen and is ideal for
putting in embedding moulds. Its optimum cutting temperature is –18ºC to –20ºC but it will also
cut well over a much wider range of temperatures and so is ideal for embedding many different
types of tissue.
6 SPARE PARTS
Parts can be obtained through your local Bright representative, or from Bright Instrument Co
Ltd. When ordering parts, please provide the following details:
a Model type and serial number of your instrument
b Full description, part number and quantity of part(s) required
c Address to which parts are to be delivered
d Address to which invoice is to be sent
6.1 5040 Parts please see Appendix Drawing and Part List
6.2 5040 ELECTRONICS SPARE PARTS
Spares for /V
To Next Page
Loading...