BRIGHT OTF 5000 - Accessories and Consumables; A Knife Sharpening Service Is Available

OTF 5000/HS/LS-001/2/3/4 Iss 4 June 2012
40
6.3 ACCESSORIES AND CONSUMABLES
Part Number
Description
/R
Conveyor for section ribbon.
50539
Orientating object holder, with fine adjustment screws, factory fitted.
50657
Orientating object holder, without fine adjustment screws, factory fitted.
50209
Triangular glass knife holder, fixed.
50681
Triangular glass knife holder, orientating. These accept 25mm high Latta-Hartmann knives with edges up
to 15mm.
52985
CO
2
(gas) object holder and knife freezer.
50208
Sloped (20º) knife holder.
50213
Ralph knife holder.
50214
Ralph knife holder with section float-out trough. For long edged glass knives with edges up to 38mm.
50230
Standard knife with box, C-profile, 189 x 27 x 10mm. 22º angle, tapped to accept holder for Shandon
knife sharpener, safety cut-outs at each end.
50724
Knife sharpening back for 50230.
50232-1
Hardened steel knife with box, C-profile, 160 x 35 x 9mm. 15º angle, suitable for large area sections.
50210
Knife sharpening back for 50232-1.
50207
Steel knife with box, C-profile, 160 x 32 x 13mm. 23º.
50211
Knife sharpening back for 50207.
51675
Handle for 50230, 50232-1 and 50207.
50234
Tungsten carbide tipped knife with box, 228 x 38 x 6mm. Suitable for cutting bone and hard plastics. NB:
needs to be resharpened at our factory.
52647
Stem for 50232-1 and 50234 knives.
52671
Knife sharpening kit. Includes hone, strop, oil, three grades of abrasive and instructions.
57612
Coarse abrasive, 6g net.
57611
Fine abrasive, 6g net.
57610
Honing compound, 6g net.
50239
Clock oil, 6g net.
50140
‘Magnacut’ disposable blade system. Consists of magnetic blade holder, 50mm anti-roll plate, 10 blades,
blade removal tool, micro-adjusting T-piece and stem, box and instructions.
50133
‘Magnacut’ disposable blade system. Consists of magnetic blade holder, Magnaplate anti-roll plate, 10
blades, blade removal tool, box and instructions.
50540
‘Magnacut’ disposable blade holder only.
52727
Long-life disposable blades for Magnacut, C-profile, pack of 50.
51564
‘Magnacut’ blade removing tool.
50240
Feather blade holder with box.
50241
Feather disposable blades, pack of 50.
50162
Adaptor, to accept Ames cryostat, saddle type object holders.
52658
Vertical vice clamp.
57713-1
Bright Cryospray 134, 300ml aerosol can.
57713
Bright Cryospray 134, 300ml aerosol can, carton of 12 cans.
54791
Low temperature oil, 200ml bottle.
54791-1
Low temperature oil, 4.54 litre drum.
57344
Knife cleaning brush.
57808
Anti static brush, 12mm.
52531
Wax brush and debris tray.
6.4 A KNIFE SHARPENING SERVICE IS AVAILABLE
DETAILS ON REQUEST