OTF 5000/HS/LS-001/2/3/4 Iss 4 June 2012
42
Retraction on return stroke Approx. 50µm
Section range 0.5 to 30µm in 0.5µm increments
Maximum head advance 5.6mm
Maximum knife block adjustment 44mm (Coarse control)
Knife angle adjustment 25º
Window surround Heated
Window demist system Fan driven, automatic
Surface finishes Easy clean, scratch and solvent resistant, flame
retardant
Defrost clock Analogue with battery back-up
Non urgent controls Side mounted
Normal working height all models 990mm
Low working height all models 890mm
Overall height all normal height models 1300mm
Overall height low height models 1200mm
Width Basic/LS models 755mm with handle
Width HS model 840mm with handle
Depth all models 935mm
Nett Weight - Basic and LS 120Kg
Nett Weight – HS 140Kg
Note: If the handle is removed to negotiate doorways a further 65mm can be gained
LS Specification
As the basic specification but with the addition of the following items:
Object orientation Fine, with +/-8º in horizontal and vertical axes,
360º rotation
Motorised Advance/Rewind 2 speed, 116µm/s and 164µm/s with auto- reset
Specimen temperature control Fast reacting from -5ºC to minimum chamber
temperature microprocessor controlled with
LED display
HS Specification
As the LS specification but with the addition of the following items :
Section counter 6 digit LCD display
Dual refrigeration Twin compressors automatically switched with
fail-safe feature, -40ºC chamber temperature.
LT system available to go to –45ºC Note: ultra
low temperature –80ºC quick freezer cannot be
fitted to the HS model
Motor drive Features cutting window to accommodate
differences in specimen size, Infinitely variable
speed control in cutting window, Maximum
cutting speed = 35mm/s. Slow speed version
available for cutting hard materials, footswitch
operation available
To Previous Page
Loading...
