Brink Innosource Sonair - Safety Instructions; Precautionary Measures; Repair and Operation Safety

15
SAFETY INSTRUCTIONS
To use your Sonair safely and to be able to make a claim based on the
guarantee delivered with this product, please follow the instructions below.
Precautionary measures
Check to see whether the operating voltage printed on the sticker underneath
your Sonair corresponds with the electrical mains voltage. If not, please
contact your dealer or Innosource, if you live in The Netherlands.
Remove the power cable from the power socket during thunder storms.
Close your Sonair's air inlet in case of a fire.
Do not expose your Sonair to temperatures in excess of 60ºC. High tempe-
ratures may damage it.
Prevent water or other fluids from entering the Sonair. The appliance is not
waterproof.
Handle your Sonair with care. Rough handling may damage it.
Do not use aggressive chemicals to clean your Sonair. Your Sonair can only
be cleaned with a moist cloth using a few drops of washing-up liquid or multi-
purpose household cleaner.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
For your safety
Do not take the Sonair off the wall or try to open it. Only qualified personnel
are allowed to repair the Sonair. If the Sonair does not function properly,
please contact your dealer or Innosource, if you live in The Netherlands.
Remove the power cable from the power socket before replacing the filter.
NL
EN
DE
WARNING: TO PREVENT THE RISK OF AN ELECTRIC SHOCK, DO NOT OPEN
THE SONAIR. THERE ARE NO USER/SERVICEABLE PARTS INSIDE THE UNIT. FOR
SERVICING PLEASE CONTACT YOUR DEALER OR INNOSOURCE, IF YOU LIVE IN
THE NETHERLANDS.
WARNING
RISK OF ELECTRIC SHOCK
DO
NOT OPEN