23
3.6 Tips for optimal use
Make sure that the top of your Sonair is not obstructed by, for example,
curtains.
Replace the filter in your Sonair every 6 to 9 months.
Your Sonair can be fitted with two different types of filter. The sticker on the filter
shows what type of filter is installed in your Sonair. We recommend that you
replace the filter in your Sonair every 6 to 9 months. You can order the filters
at your dealer or by e-mail info@innosource.nl, if you live in The Netherlands.
The old filter can be disposed of with the household rubbish.
4.1 G2 filter
Your Sonair is standard fitted with a G2 filter. This filter
is used under normal dust load conditions. The G2 filter
captures 50-70% of the particles larger than 10 µm, such
as leaves, insects, and dust particles including hairs, textile fibres, sand, pollen
and spores.
4.2 F6 fine dust particle filter
The F6 fine dust particle fine filter is used when the
dust load is moderate to high. This filter captures 99%
of all dust particles larger than 10 µm and 95-99% of all
particles larger than 5 µm, including very fine dust such as pollen, spores,
cement dust and excreta of the house dust mite.
4
FILTERS
NL
EN
DE
To Next Page
Loading...
