EasyManuals Logo

BRIO CLPOU520UVF4 User Manual

BRIO CLPOU520UVF4
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
Filter Replacement Schedule
FILTER TYPE REPLACEMENT SCHEDULE FUNCTION
Carbon 6 months or 950 gallons
Reduces chlorine, taste and odor, lead
and cysts.
Sediment 6 months or 950 gallons
Performs a coarse ltration of original
water. Removes mud, sand, iron, rust,
and suspensions, and impurities.
Ultra-ltration 9 months or 1,425 gallons
Removes suspended solids, bacteria,
colloidal silica, pyrogens, and large
organic materials.
Post carbon 6 months or 950 gallons Taste and impurity removal.
Replace the Filters
IMPORTANT: Only replace the lters with new lters designed for this dispenser. Any other
type of lter will damage the machine and void any warranty.
When a lter is approaching the end of its life, the red indicator light starts to blink. When the lter
has reached the end of its life, the indicator light remains red. To change lters:
1. Shut off the water supply.
2. Remove the old lters and replace with new lters. Ensure the sediment lter is on the left and
the carbon block lter is on the right.
3. To ush your new lters, follow the instructions in Step 5 - Flush the Filters and Complete the
Installation.
4. Press the lter reset button until the red indicator light turns off.
Filter Specications
Sediment Filter Carbon Filter
(Sediment, Dirt, and Rust Removal) (Taste and Impurity Removal)
FILTER CAPACITY
950 Gallons
FILTER CAPACITY
950 Gallons
FLOW RATE
0.8 GPM
FLOW RATE
0.8 GPM
SUGGESTED PSI
14.5 - 58 psi
SUGGESTED PSI
14.5 - 58 psi
TEMPERATURE
33 - 100 °F
TEMPERATURE
33 - 100 °F
Ultra-ltration Filter Post Carbon Filter
(Removes suspended solids, bacteria, colloidal (Taste and Impurity Removal)
silica, pyrogens, and large organic materials)
FILTER CAPACITY
1,425 Gallons
FILTER CAPACITY
950 Gallons
FLOW RATE
0.5 GPM
FLOW RATE
0.8 GPM
SUGGESTED PSI
14.5 - 58 psi
SUGGESTED PSI
14.5 - 58 psi
TEMPERATURE
33 - 100 °F
TEMPERATURE
33 - 100 °F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BRIO CLPOU520UVF4 and is the answer not in the manual?

BRIO CLPOU520UVF4 Specifications

General IconGeneral
BrandBRIO
ModelCLPOU520UVF4
CategoryWater Dispenser
LanguageEnglish

Related product manuals