Rinnai 16 Ducted Gas Heater IM
3.5 AREA TO CUT IN THE WALL
When installing the heater at ground level, create one rectangular hole to suit the total pop width and height, all the
way to ground level, refer Diagram 3.
Diagram 3.
Refer to the Base Box for required wall cut out dimensions.
3.6 INSTALLATION OF FLASHING
Flashing must be fitted to ensure the ductwork is adequately weather protected.
WALL CUT
OUT AREA
CONCRETE
BASE
GROUND
HEATER DIMENSIONS AND CLEARANCES
To Next Page
Loading...
