Rinnai 29 Ducted Gas Heater IM
10. BRACKET POSITIONING
10.1 TEMPERATURE LIMIT POSITIONING (APPLICABLE TO BX315C/BX320C ONLY)
The temperature limit sensor bracket is tucked within the cabinet cavity for transportation purposes.
• Please ensure the bracket is positioned as illustrated in Diagram 11 during installation/commissioning.
• Make sure that the overheat bracket is not bent past the angle stopper.
Diagram 11. Temperature limit sensor bracket position
Failure to comply may result in abnormal heater operations.
Bend overheat bracket down
during installation
107.0°
Do not bend overheat bracket
To Next Page
Loading...
