User Guide NetXtreme II
January 2010
Broadcom Corporation
Document ENGSRVT52-CDUM100-R iSCSI Offload Page 101
11. On the General tab, select the Broadcom NetXtreme Ii C-NIC iSCSI adapter from Local adapter.
12. Click OK to close Advanced settings.
13. Click OK to close the Microsoft Initiator.
14. To format your iSCSI partition, use Disk Manager.
NOTES:
• No teaming support for iSCSI-enabled adapters is available at this point. MPIO handles all failover and link
aggregation for iSCSI traffic.
• Network teaming and MPIO are supported concurrently on different ports. Ports running iSCSI use MPIO and
ports running LAN traffic use network teaming.
• If a Broadcom network adapter has iSCSI offload enabled, the teaming software, BASP, will not allow the iSCSI
offload enabled network port interface to be a part of a GEC or LACP (802.3ad) team, but SLB teams are
allowed.
To Next Page
Loading...
Need help?
General
