Broadcom NetXtreme II User Manual

NetXtreme II User Guide
January 2010
Broadcom Corporation
Page 60 Appendix A: Event Log Messages Document ENGSRVT52-CDUM100-R
20 Error Driver initialization failed. Unspecified failure during
driver initialization.
Reinstall the driver, update to a
newer driver, run Broadcom
Advanced Control Suite 3
diagnostics, or replace the
adapter.
21 Informational Network controller
configured for 10Gb full-
duplex link.
The adapter has been
manually configured for the
selected line speed and
duplex settings.
No action is required.
22 Error Network controller failed
initialization because it
cannot allocate system
memory.
Insufficient system memory
prevented the initialization of
the driver.
Increase system memory.
23 Error Network controller failed to
exchange the interface with
the bus driver.
The driver and the bus driver
are not compatible.
Update to the latest driver set,
ensuring the major and minor
versions for both NDIS and the
bus driver are the same.
Table 8: Base Driver Event Log Messages (Cont.)
Message
Number
Severity Message Cause Corrective Action

Broadcom NetXtreme II Specifications

General

Brand	Broadcom
Model	NetXtreme II
Category	Network Card
Language	English