Brookfield Engineering Laboratories, Inc. Page 19 Manual No. M/92-021-N0902
CP 123456789
TIMED TORQ DONE
Figure II-26
The display will switch between that of Figures II-25 and II-26 for each press of either the
UP or DOWN ARROW key. Pressing any key except the UP or DOWN ARROW key will cause
the viscometer to exit the Timed Torque mode and resume normal operation.
NOTE: For the Time to Torque method, the DV-I+ Viscometer will retain the last entered
torque in EEPROM for use when the user elects to perform a time to torque test
again.
To Next Page
Loading...
Need help?
General
