Brookfield Engineering Laboratories, Inc. Page 4 Manual No. M/92-021-N0902
I.1 Components
Component Part Number Quantity
DV-I+ Viscometer varies 1
Model S Laboratory Stand Model S 1
Spindle Set with Case varies 1
LVDV-I+ set of four spindles or (SSL) 1
RVDV-I+ set of six spindles (#2 through #7) (SSR) 1
HA/HBDV-I+ set of six spindles (#2 through #7) (SSH) 1
For cone/plate versions, a spindle wrench, one cone spindle and sample cup,
Part No. CPE-44Y replace the spindle set.
Shipping Cap B-30-2 1
Power Cord DVP-65 1
Guardleg
(not supplied with Cone/Plate versions)
LVDV-I+ or B-20Y 1
RVDV-I+ B-21Y 1
Carrying Case DVE-7Y 1
The following applies to DV-I+ Viscometers with the temperature probe option.
Look for this symbol throughout this manual for instructions pertaining
specifically to DV-I+ Viscometers with temperature probe option.
RTD Temperature Probe DVP-94Y 1
Probe Clip DVE-50 1
Please check to be sure that you have received all components and that
there is no damage. If you are missing any parts, please notify Brookfield
Engineering or your local Brookfield agent immediately. Any shipping
damage must be reported to the carrier.
Tp
I.2 Utilities
Input Voltage: 115 VAC or 230 VAC
Input Frequency: 50/60 Hz
Power Consumption: Less than 20 WATTS
Power Cord Color Code:
United States Outside United States
Hot (live) Black Brown
Neutral White Blue
Ground (earth) Green Green/Yellow
To Next Page
Loading...
Need help?
General
