Brookfield DV-I+ Series User Manual

Brookfield Engineering Laboratories, Inc. Page 39 Manual No. M/92-021-N0902
Appendix F - Special Speed Sets
The following special speeds sets are available from Brookfield Engineering Laboratories. All
speeds are in units of RPM.
Step SS200 SS150 SS100 SS50 SS25 SSINT
1 0.0 0.0 0.0 0.0 0.0 0.0
2 1.0 0.8 0.5 0.2 0.1 0.3
3 1.4 1.1 0.7 0.3 0.2 0.5
4 1.8 1.4 0.9 0.4 0.3 0.6
5 2.0 1.5 1.0 0.5 0.4 1.0
6 4.0 3.0 2.0 1.0 0.5 1.5
7 6.0 4.0 3.0 1.5 0.7 2.0
8 8.0 6.0 4.0 2.0 1.0 2.5
9 10 7.5 5.0 2.5 1.2 3.0
10 20 15 10 5.0 2.5 4.0
11 40 30 20 10 5.0 5.0
12 60 40 30 15 7.5 6.0
13 80 60 40 20 10 10
14 100 75 50 25 12 12
15 120 90 60 30 15 20
16 140 105 70 35 17 30
17 160 120 80 40 20 50
18 180 135 90 45 22 60
19 200 150 100 50 25 100
RPM SPEED SET (RPM)
Table F-1
Please consult Brookfield Engineering or your local dealer/distributor for any special speed
requirements not addressed by either the standard speed sets shown in Table 1 (page 8) or in
Table F-1.

Brookfield DV-I+ Series Specifications

General

Brand	Brookfield
Model	DV-I+ Series
Category	Measuring Instruments
Language	English