Brookfield DVE - 1.1 Components of the DVE Viscometer; 1.2 Utilities and Power Requirements

AMETEK Brookeld Page 6 Manual No. M15-356-B0916
I.1 Components
Please check to be sure that you have received all components, and that there is no damage. If you
are missing any parts, please notify AMETEK Brookeld or your local authorized dealer immediately.
Any shipping damage must be reported to the carrier.
COMPONENT PART NUMBER QUANTITY
DVE
varies 1
Model A Laboratory Stand Model A 1
Spindle Set with Case varies 1
DVELV set of four spindles (#61 through #64) SSL
DVERV set of six spindles (#02 through #07) SSR
DVEHA/DVEHB set of six spindles (#02 through #07) SSH
Shipping Cap B-30-3Y 1
Power Supply AV-6 1
Power Cord (115V/230V) varies
Guard leg ( not supplied with HA/HB versions) varies 1
DVELV B-20Y
DVERV B-21Y
Carrying Case DV-3401 1
Operating Instructions M15-356 1
I.2 Ulies
VAC; Hz Limits: 100 - 240 VAC; 50/60 Hz ±5%
Power Supply: 15 Watts, Class II certied plug-in power supply rated: 12 V @ 1.25A
Main supply voltage uctuations are not to exceed 10% of the nominal supply voltage.
Must be used with AV-6 Power Supply. Alternative power sources may cause damage to the
instrument.