INTRODUCTION 1 - 1
1
Using this Guide
Thank you for buying a Brother Digital Copier/Printer (DCP). Your
DCP is simple to use, with LCD screen instructions to guide you
through programming it. You can make the most of your DCP by
reading through this Guide.
Finding information
All the chapter headings and subheadings are listed in the Table of
Contents. You will be able to find information about a specific feature
or operation by checking the Index at the back of this Guide.
Symbols used in this Guide
Throughout this Guide you will see special symbols alerting you to
important warnings, notes and actions. To make things clearer and
to help you press the correct keys, we used special fonts and added
some of the messages that will appear in the LCD.
Introduction
Bold Bold typeface identifies specific keys on the DCP
control panel.
Italics
Italicized typeface emphasizes an important point or
refers you to a related topic.
Courier New
Courier New type face identifies the messages on the
LCD of the DCP.
Warnings inform you what to do to avoid possible personal
injury.
Cautions specify procedures you must follow or avoid to
prevent possible damage to the DCP.
Notes tell you how you should respond to a situation that may
arise or give tips about how the current operation works with
other features.
Improper Setup alerts you to devices and operations that are
not compatible with the DCP.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
