Brother DCP-110C - How to Load Paper, Envelopes and Post Cards; To Load Paper or Other Media

INTRODUCTION 1 - 11
How to load paper, envelopes and post cards
To load paper or other media
1
Pull the paper tray completely out of the DCP and remove the
output paper tray.
2
Press and slide the paper side guide to fit the paper width.
3
Pull out the paper support and unfold the paper support flap.
Use the paper support flap for Letter, Legal and A4.
Paper Side Guide
Paper Support
Paper Support Flap
Downloaded from ManualsPrinter.com Manuals